*
*
*
*
*
*
LABORATORY PLASTICWARE
Plastic Erlenmeyer - Conical Flask
Made of translucent polypropylene, this cone shaped flask comes with
a securely fitting, coarse threaded cap. This flask is autoclavable
and leakproof when the screw cap it tightly applied.
#300-100 100ml capacity pkg.
of 12
#300-250
250ml capacity pkg. of 12
#300-500 500ml capacity pkg.
of 12
Seperatory Funnels
Translucent polypropylene construction with leak proof with tight fitting,
coarse threaded caps. Each unit comes with a built in, high quality,
self lubricating PTFE stopcock and is completely autoclavable.
#500-100 100ml capacity pkg.
of 2
#500-250 250ml capacity pkg. of
2
#500-500 500ml capacity pkg. of
2
Measuring Jugs
Polypropylene construction with molded, raised graduations and sturdy,
reinforced handle. These jugs are translucent, have good chemical
resistance and is completely autoclavable.
#700-250 250ml capacity
pkg. of 12
#700-500 500ml capacity
pkg. of 12
#700-1000 1000ml capacity pkg. of
6
#700-2000 2000ml capacity pkg.
of 6
Beakers - Graduated
Each beaker is molded from tough translucent, polypropylene and incorporates
raised, outer graduations for ease of reading. These beakers have
a tapered spout, are chemical resistance and are autoclavable.
#100-050 50ml capacity
pkg. of 12
#100-100 100ml capacity
pkg. of 12
#100-250 250ml capacity
pkg. of 12
#100-500 500ml capacity
pkg. of 12
#100-1000 1000ml capacity pkg. of
6
Plastic Scoops
Each scoop is made from High Density Polyethylene
and individually wrap. Long handles help to keep hands away from
material.
#1837 4oz Scoop, 7 1/2" handle length
#1839 2oz Scoop, 7" handle length
#1838 1 Tbs. Scoop 9" handle length
Utility Funnels, Long Stem
Each funnel is smooth walled and molded from chemical resistant polypropylene.
Long stemmed with a 60 degree cone angle and external ribs to prevent air
lock.
#400-050 50mm pkg of 72
#400-062 62mm pkg of 36
#400-075 75mm pkg of 36
#400-100 100mm pkg of 36
#400-150 150mm pkg of 12
Cylinders - Single Scale
Each cylinder is molded from tough translucent polypropylene and incorporates
raised graduations for easy reading. These cylinders are autoclavable
and have a broad base for stability.
#200-010 10ml capacity
pkg of 24
#200-025 25ml capacity
pkg of 12
#200-050 50ml capacity
pkg of 12
#200-100 100ml capacity
pkg of 12
#200-250 250ml capacity
pkg of 6
#200-500 500ml capacity
pkg of 4
#200-1000 1000ml capacity pkg of 3
#200-2000 2000ml capacity pkg of 2
Burette, Acrylic with PTFE Stopcocks
This burette is made from clear acylic with bright white, silk screened
graduations and comes with a built in, high quality, self lubricating PTFE
stopcock. Each burette is individually calibrated for maximum accuracy.
Unaffected by dilute mineral acids and bases except Hydrofloric Acid and
Ammonium Hydroxide.
#600-025 25ml capacity
#600-050 50ml capacity
Science Wiz Kits
Highly visual, step-by-step instructions and age appropriate materials
make science content accessible to readers and non-readers alike.
Each set includes a book and all the lab materials necessary to create
either an individualized enrichment station or a complete set of classroom
demonstrations. Stunning posters give eye-catching reinforcement
to each unit. One kit per subject:
#7800 Electricity
#7804 Chemistry
#7801 Magnetism
#7802 Light
#7806 Newton's Laws #7805
Energy
#7901 Inventions
#7808 DNA
# Sound
Staining Dishes
These staining dishes holds standard 1" x 3" microscope slides.
The jars are made from thick annealed glass with slots molded into the
glass. Each slot is designed to hold two slides back to back.
#200-003 Staining Dish for 20 Slides
Ten slots are molded into the glass dish. Overall dimensions
is 1 1/4" x 2 1/8" x 3 1/8" (32 x 54 x 79mm).
#200-004 Staining Dish for 10 Slides (Glass
Cover)
Five molded slots holds ten slides. Widest outside dimension
is 2 3/8" diameter (60mm) and stands 4 5/16" tall (110mm).
#200-005 Staining Dish for 10 Slides (Plastic
Cover)
Similar to the above staining dish except with a tight fitting plastic
lid. 2 3/8" diameter (60mm) and stands 4 5/16" tall (110mm).
#200-006 Staining
Dish for 16 Slides
Overall dimensions is 2 1/2" x 2 1/2" x 4" (63 x 63 x 112mm).
Plastic Scoops
Each scoop is made from High Density Polyethylene
and individually wrap. Long handles help to keep hands away from
material.
#1837 4oz Scoop, 7 1/2" handle length
#1839 2oz Scoop, 7" handle length
#1838 1 Tbs. Scoop 9" handle length
#1304 Student Microscope
A perfect microscope for lab and field use. Sturdily constructed
of cast metal and completely self-contained. No knobs to break or
lose. Focusing is done my moving the barrel up and down. This
microscope incorporates a built in light gathering prism for good illumination
using only ambient light. Comes with a 10x eyepiece and a 4x objective
lens for good quality viewing. The stage has built in spring clips
and the upper section tilts back for more comfortable use. 4" x 5.5"
x 10.5". wt, 2.5 lb.
#1304-1 Extra 5x Eyepiece (WF5x)
#1304-2 Extra 10x Objective Lens (10/0.25)
Glass Desiccators
These heavy glass desiccators are made from qulaity annealed glass
for durability. Each includes a glazed porcelain sample plate that
is held over the desiccant. For an airtight seal apply grease to
the internal edges of the flange, press the lide on and rotate 360 degrees.
#200-001 Glass Desiccator 200mm
#200-002 Glass Desiccator 250mm
#000-104 Alcohol Burner
Almost every science class needs a small heat source and these polished
metal alcohol burners are much safer than glass burners. The flame
can easily be controlled higher or lower by rotating the ratcheted wick
control wheel. The air cap is securely attached to the burner by
a matching polished chain. Unit measures 3.5" tall and is 2.75" in diameter.
Weight 150 grams, 150ml capacity.
#1257 Magnetic Lines of Force Demonstration
This clear acrylic plate makes understanding the lines of magnetic
force much easier for the student because the lines are so visible.
Iron filings float in a layer of oil and orientate themselves according
to the magnetic force of any magnet place on top. Great for overhead
projectors. (Magnet not included). Size is 7/16" x 4 3/4" x
8 3/4", 292 grams.
Extension Support Rings
Each of these extension rings is produced from strong heat resistant
cast steel.
Tough zinc plating helps to protect the rings and to combat rust.
#G110 2" Inside Diameter
#G111 3" Inside Diameter
#G112 4" Inside Diameter
#G113 5" Inside Diameter
# 280-A DC Motor with Leads
This little yet powerful motor is ideal for hundreds of electrical
experiments
and projects. The motor housing is 23.8 mm in diameter and 30.5
mm in
length with an overall length of 45mm including the 2mm diameter shaft.
Voltage requirements are 4.5 to 6.0 dc volts. Each unit also
incorporates a
30mm long red and black connector cord with insulators.
Weight is 50 grams.
#Cork Borer Sets
Three different cork borer sets to fit your needs. Each set comes
sharpened and with a plug removing rod.
#000-101 Brass, 9 pcs. set (1mm to 9mm)
#000-102 Brass, 15 pcs. set (1mm to 22mm)
#000-103 Nickel Plated Steel, 10 pcs. set (1mm to 10mm)
Separatory Funnels with PTFE Stopcocks
Bomex brand, conical shaped Separatory Funnels. PTFE stopcocks
never need greasing. Great quality at a very low price.
#850050 50ml capacity
#850100 100ml capacity
#850250 250ml capacity
#850500 500ml capacity
#851000 1000ml capacity
#808-1 Hook's Law (New Style)
We are proud to introduce an improved version of our Hook's Law apparatus.
This new model comes with a sturdy cast metal base, testing spring, metal
scale, four 20 gram weights and combination 20 gram weight hanger/indicator
needle. Instructions included. Size is 4" x 4" x 12"
(1.5 lbs)
#501-14 Van de Graaff Generator with accessories
Introducing a new Van de Graaff Genrator that is both high quality,
variable speed and affordably priced. Everything is visible to the
student with this remarkable unit. Complete with many accessories
such as a discharge wand, extra belt, pithball & stand, discharge needles,
comb, spinning wheel, neon tester, synthetic hair with plug, aluminum cup
and static chamber. 8" x 11" x 24" (10 lbs.)
#1813 Wave Demonstration Spring
Studying waves in physics class can sometimes be difficult for students
to conceptualize. This 3" diameter flat spring steel apparatus can
make visualizing wave propagation much easier. The plated spring
can be stretched across the room allowing the entire class to witness the
wave traveling back and forth.
Molecular Model Sets
High quality molecular model kits that will last a lifetime.
Made from a super strong, unbreakable pre-colored plastic, allowing students
to construct simple inorganic compounds. The connecting bonding plugs
fit securely yet are flexible enough for double bonding applications.
The balls are precision drilled for correct bond angles.
#1863 Deluxe Set (370 balls plus lugs)
#1864 Basic Set (74
balls plus lugs)